
Perimeter security basics: what a mesh fence can and cannot do
A good fence slows people down, marks the boundary clearly and channels access. It is one layer of security, not the whole system, and it should be planned that way.
What is the role of a fence in security?
In short: to mark the boundary, deter casual intrusion, delay a determined intruder and guide people towards controlled entrances.
Security professionals tend to think in layers: deter, detect, delay, respond. A fence works mainly in the first and third layers. It tells everyone where private property begins, it discourages casual trespass, and it makes a determined intruder spend time and effort getting through or over it.
What a fence does not do is detect. Without lighting, cameras, alarms or people watching, a fence can be climbed or cut without anyone knowing. That is why we describe our fences as sturdy perimeter fences, and leave detection and response to specialist security companies.
Is mesh or sheet better for security?
In short: mesh keeps visibility, so intruders can be seen; sheet hides activity on both sides. Which is better depends on whether you want to see or to hide.
There is no single answer. A see-through 2D double-wire panel lets cameras, guards and passers-by see what happens on both sides, and it gives intruders nowhere to hide. A metal sheet fence hides valuable stock from view, which can reduce temptation, but also hides anyone working on the inside of the fence.
Many industrial sites combine the two: mesh along the street, sheet along storage areas. Our article on mesh or sheet for warehouses and plots discusses the choice.

Where are the weak points of a perimeter?
In short: gaps under the fence, accessible fixings, climbing aids next to the fence, unlit corners and poorly controlled openings.
When we look at an existing perimeter, the weak points are usually not the panels themselves:
- Gaps at the bottom, which a continuous base closes off
- Clips and fixings that can be undone from outside
- Objects next to the fence – bins, pallets, walls, trees – that act as ladders
- Unlit corners out of sight of buildings and cameras
- Openings where the fence meets a building or a gate
Some of these are fence design questions, others are site management. A base, as described on our precast base page, closes the bottom; keeping a clear strip along the fence removes climbing aids.

Can you simply build a higher fence?
In short: not freely – heights are limited by the town's planning rules and, in urbanisations or estates, by their own rules, so check before designing.
Height helps security, but it is regulated. The town's general plan and ordinances, and often the urbanisation's or industrial estate's own rules, set what is allowed on a boundary (check for each site). Some places also restrict toppings such as barbed wire on boundaries next to public spaces.
The owner checks these rules with the ayuntamiento; we then build within them. See our guides on vacant plot rules and warehouse boundary rules for what to ask.
How should a fence be planned with other security measures?
In short: decide camera positions, lighting and controlled entrances before setting out the fence, so all of them work together.
If cameras, lighting or alarm detectors are part of the plan, the security company and the fencing contractor should know about each other early. Cameras may need clear views along the fence line; lighting may need cable routes that cross it; detectors may need fixing points. Planning these together avoids digging twice or blocking a camera's view with a sheet panel.
We build the fence and can work to a layout agreed with your security provider. We do not design or install security systems ourselves.

What about security for a villa or holiday home?
In short: a rigid mesh fence on a base marks the boundary and keeps out casual intruders and animals; for empty homes, combine it with monitoring.
For owners who are often away, the fence is mainly about clarity and deterrence: a well-kept, continuous boundary without gaps signals that the property is cared for. A 3D mesh panel fence on a base also keeps out stray dogs and wildlife. For real protection of an empty home, add monitoring and someone who can respond, and keep the fence in good condition so it does not look abandoned.
Articles and guides

2D double-wire mesh panel fence for sites that need a stiffer panel
The 2D panel is flat, heavy-looking and stiff, with each vertical wire held between two horizontal wires. We build it on proper footings for commercial, community and residential boundaries.
View details →Metal sheet fencing: an opaque steel boundary on posts and rails
When a boundary has to be solid rather than see-through, profiled steel sheet on posts and rails is a practical answer. We build it as a permanent fence, sized for the wind it will catch.
View details →
Mesh panel or metal sheet: which fence for warehouses and plots?
For industrial yards and empty plots, the choice usually comes down to two options: see-through rigid mesh or solid profiled sheet. Each solves different problems.
View details →
Warehouse boundary rules: what to check before fencing industrial land
Fencing a nave or an industrial plot involves the same duties as any property, plus estate rules, street frontages, services and a business that has to keep running.
View details →Frequently asked questions
Does a mesh fence stop intruders?
It deters and delays them, but a determined intruder can get through any fence given time. Detection and response are needed for real protection.
Is sheet more secure than mesh?
Not necessarily. Sheet hides what is inside but also hides intruders. Mesh keeps visibility for cameras and people.
Can you add barbed wire on top?
Toppings are regulated in many places, especially next to public spaces. Check the local rules first; security design is a specialist field.
Do you install cameras or alarms?
No. We build the fence and can work to a layout agreed with your security provider.
How do I stop people crawling under the fence?
A continuous base, either precast or a built low wall, closes the gap at ground level.
Is a 2D panel harder to cut than a 3D panel?
We do not make claims about cutting resistance. 2D double-wire panels are stiffer, which is one reason they are common on commercial sites.
Can I build the fence higher for security?
Only within what the town and any community or estate rules allow. Check with the ayuntamiento before deciding the height.
Should I leave a clear strip along the fence?
Yes, keeping objects and vegetation away from the fence removes climbing aids and keeps sightlines open.
Do you secure the fixings against tampering?
Fixing options depend on the post system. We can discuss what the chosen system allows during the assessment.
Is a fence enough for an empty holiday home?
It is a good first layer, but for an empty home monitoring and someone who can respond are important too.
Send photos and the length of your fence line
We build the whole fence – groundwork, base, posts and panels. Send photos and the approximate length for a first assessment and an itemised quote, no commitment.