Panel Rígido Málaga2D/3D mesh panel & sheet fencing
Panel (slats / mesh)Strip footingLow wall (murete)PillarPanel (slats / mesh)Ground
Metal sheet fence

Metal sheet fencing: an opaque steel boundary on posts and rails

When a boundary has to be solid rather than see-through, profiled steel sheet on posts and rails is a practical answer. We build it as a permanent fence, sized for the wind it will catch.

A metal sheet fence (valla de chapa in Spanish) is a solid fence made of profiled steel sheets fixed to horizontal rails on steel posts set in concrete, used to screen and close off yards, plots and properties.

What is a metal sheet fence?

In short: profiled steel sheets fixed to rails on posts, forming a continuous opaque wall of metal.

A sheet fence is built differently from a mesh fence. Instead of panels clipped directly between posts, there is a frame: steel posts set in concrete footings, horizontal rails fixed between them, and profiled sheets screwed to the rails. The profile – the ribs or corrugations along the sheet – gives the sheet its stiffness.

The sheets are usually galvanised and often coated in a colour. Our guide to galvanised and coated finishes explains what each treatment does and why cut edges and screw holes need attention.

We build sheet fences as permanent boundaries. Temporary hire hoarding for building sites is a different product and not something we offer.

When does an opaque sheet fence make sense?

In short: when you need to hide a yard or plot, stop windblown rubbish or dust, or create a solid boundary quickly.

Sheet fences are a practical choice for:

  • Industrial yards (see warehouse fencing) where stored material, machinery or vehicles should not be visible from the street
  • Vacant plots (see plot and site fencing) where the owner wants to block views and windblown rubbish
  • Rural properties that need a solid boundary along a track
  • Residential boundaries where privacy matters more than the view, and the community rules allow it

If you mainly need privacy for a villa garden, the look of steel sheet may not suit; aluminium slats or composite boards are worth comparing at vallasaluminiomalaga.eu. For the mesh-versus-sheet decision on industrial land, read our comparison article.

Why does wind matter more for a sheet fence?

In short: a solid fence catches the wind like a sail, so posts, rails and footings must be sized for the exposure – a light mesh structure is not enough.

Wind passes through mesh but pushes against sheet. The whole load reaches the posts and from there the footings. That is why a sheet fence needs a heavier structure than a mesh fence of the same height, and why exposed sites – hilltops, open plots, coastal fronts – need particular care.

We size posts, rails and footings to the site based on our experience of the exposure and ground, and we will tell you if a height or position needs a technician's assessment. We do not carry out structural calculations; where one is needed, an aparejador or ingeniero must provide it. Our guide to posts and fixings explains why the post and footing matter more than the infill.

What should be checked before building a sheet fence?

In short: whether the town and the urbanisation allow opaque fences at that height, the exact boundary, the wind exposure and the drainage along the line.

Opaque fences are more often restricted than open ones. Some towns and urbanisations limit how high a solid fence may be or require the upper part of a boundary to be open (check with your ayuntamiento and community). Check before you decide, not after.

We also look at water: a solid fence with a closed bottom can hold back rainwater running across the plot. We plan the bottom of the fence and any gaps or drainage before building. Finally, the boundary must be clear; a solid fence on the wrong line is a bigger problem than a mesh one. Our plot rules guide covers what to ask.

How do you maintain a sheet fence?

In short: check screws and fixings after storms, keep the bottom clear of soil and debris, and treat scratches and cut edges before they rust.

Sheet fences are simple to maintain if you check them now and then. After strong wind, walk the line and look for loose screws, bent sheets or posts out of plumb. Keep soil and rubbish from piling against the bottom, where moisture would sit. Scratches and cut edges are where corrosion starts; touch them up promptly, especially near the sea.

What affects the cost of a sheet fence?

In short: length, height, sheet profile and finish, the post and rail structure, footings, wind exposure, ground and access.

Because the structure has to resist wind, posts, rails and footings take a larger share of the cost than on a mesh fence. Height has a double effect: more sheet and a heavier structure. Our quote lists each of these as separate items. For a broader view of fence costs, see our 2026 cost article and presupuestovalla.eu.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
How we build it – step by step

How we build it – step by step

  1. Setting out

    We mark the line and check levels, exposure and drainage along the route.

  2. Excavation

    Post holes are dug to suit the ground and the expected wind load.

  3. Footings and posts

    Posts are set in concrete footings, plumb and aligned, and braced while the concrete cures.

  4. Rails

    Horizontal rails are fixed between the posts at the agreed levels.

  5. Sheets

    Profiled sheets are fixed to the rails with suitable screws, overlapping as the profile requires.

  6. Edges and finishing

    Cut edges and drilled holes are treated, caps and trims are fitted.

  7. Clean-up and handover

    Offcuts, swarf, spoil and packaging are removed and the fence is handed over.

When is it the right choice – and when not?

When is it the right choice – and when not?

A good fit if…

  • Screening industrial yards and storage areas
  • Vacant plots that should not be visible
  • Blocking windblown rubbish and dust
  • Solid rural boundaries along tracks

Consider another option if…

  • Temporary building-site hoarding – not offered
  • Villa gardens where appearance is a priority
  • Very exposed sites where a technician has not checked the structure
  • Boundaries where the town or community requires an open fence
What affects the cost?

What affects the cost?

We don't publish fixed prices: every fence is quoted line by line using these factors.

  • Linear metres
  • Fence height
  • Sheet profile and finish
  • Post and rail structure
  • Footing size for the wind exposure
  • Ground conditions
  • Slope along the line
  • Access for long sheets and materials
  • Removal of an old fence
  • Licence paperwork (owner's responsibility)

Fence cost calculator See how a fence quote is put together

Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Our specialist sites by fence type
FAQ

Frequently asked questions

Is a sheet fence the same as builders' hoarding?

No. Hoarding is usually temporary and hired. We build sheet fences as permanent boundaries on concrete footings, and we do not offer temporary hoarding.

Is a sheet fence stronger than mesh?

It is more solid, but it also catches far more wind, so it needs a heavier structure. Strength depends on the posts and footings, not only the sheet.

Can I have a sheet fence at home?

Often yes, if your town and community allow an opaque fence of that height. Check the rules first.

What colours are available?

Sheets are usually galvanised and may be coated in a colour. Availability depends on the supplier when we order.

Do sheet fences rust?

Galvanised and coated sheet resists corrosion, but cut edges, screw holes and scratches are weak points. Treating them and checking the fence periodically keeps it in good condition.

Can you combine sheet with mesh on the same boundary?

Yes. A common approach on industrial sites is mesh where visibility is useful and sheet where screening is needed.

Do you calculate wind loads?

No, we do not prepare structural calculations. We size the structure from experience and tell you when a technician should check it.

Can a sheet fence hold back soil?

No. A sheet fence is not a retaining wall. If soil must be retained, a technician needs to design a structure for it.

Can you replace my old corrugated fence?

Yes, as part of building a new fence. If the old sheets are asbestos cement, a specialist must remove them first.

Do you fit gates in sheet fences?

No, gates are not part of our service. We leave the agreed opening for your gate supplier.

Get a quote

Send photos and the length of your fence line

We build the whole fence – groundwork, base, posts and panels. Send photos and the approximate length for a first assessment and an itemised quote, no commitment.