Panel Rígido Málaga2D/3D mesh panel & sheet fencing
Anthracite 2D mesh panel on a base
Blog · mistakes

Common mistakes when choosing a mesh panel fence

Most fence problems are decided before the first hole is dug. These are the choices we see go wrong most often, and how to get them right.

Problems & objectionsLast reviewed: Bauman Raymond Attila

Mistake 1: choosing the panel before the purpose?

In short: decide what the fence must do first – contain dogs, mark a plot, secure a yard – and choose the panel to suit.

It is natural to start with what you see: a colour, a style, a panel on a neighbour's fence. But a fence for a small dog, a fence for a plot and a fence for a warehouse need different things. Write down the purpose, then choose between a 3D panel, a 2D double-wire panel or something else entirely. Our 2D vs 3D comparison can help.

A useful exercise is to imagine the fence in five situations: a dog trying to get out, a neighbour looking in, a strong wind, a car reversing into it and you trying to mow along it. Whichever situations matter most for your property will tell you more about the right fence than a catalogue photo.

Mistake 2: forgetting the bottom of the fence?

In short: without a base, there is a gap under the panels – fine for some boundaries, a problem for dogs, rabbits, lawns and slopes.

Panels hung on posts usually leave a gap at the bottom, which grows on uneven or sloping ground. Dogs dig under, rabbits slip through, grass grows into the mesh. A precast base or low wall closes the gap. Deciding this later is expensive, because the posts usually have to change. See our precast base page.

Mistake 3: ignoring town and community rules?

In short: height, colour and solid parts are often regulated; check with the ayuntamiento and the community before ordering.

We regularly meet owners who chose a height or a colour that their urbanisation does not allow. Each town's planning rules and many community statutes set limits. Ask before you order, and give your contractor the answer in writing. Our plot rules guide explains the general framework.

Mistake 4: buying mismatched panels, posts and clips?

In short: panels, posts and clips must belong to one compatible system, or the fence will rattle and loosen.

Buying panels from one place and posts from another can work, but often it does not. Clips designed for a different post or wire thickness never hold properly. If you supply your own material, send us the details first and we will check compatibility. Our posts and clips guide explains why.

Mistake 5: building before the boundary is clear?

In short: settle the lindero with documents and the neighbour first; moving a fence later costs more than measuring twice.

A fence on the wrong line becomes a dispute that lasts longer than the fence. Find the boundary markers, check the plans, talk to the neighbour. If there is disagreement, resolve it before building.

Owners who live abroad are particularly exposed here, because they cannot walk the line with the neighbour. If that is your situation, send us the plans and photos of any markers, and ask someone you trust locally to confirm the corners before we set out. A short delay at this stage is far cheaper than a dispute after the footings are poured.

What other mistakes are common?

In short: choosing only on the total price, ignoring drainage, expecting a fence to retain soil and forgetting access.

  • Comparing totals, not items. Two quotes may include very different work.
  • Ignoring water. A continuous base can act as a dam on a slope.
  • Using a fence as a retaining wall. It is not one; a technician must design a retaining structure.
  • Forgetting access. If materials have to be carried, plan it and price it.
  • Expecting privacy from mesh. Mesh is see-through; consider another type if privacy matters.
BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
FAQ

Frequently asked questions

What is the most common mistake with mesh fences?

Choosing the panel before deciding what the fence must do. The purpose should drive the choice.

Do I always need a base?

No, but it is often a mistake to skip it with dogs, lawns, small animals or slopes.

Can I mix panels and posts from different suppliers?

It is risky. Clips and posts must match the panel; we check before installing.

What happens if my fence breaks community rules?

The community or the town may require changes. Check rules before ordering.

Is a cheaper quote always worse?

Not necessarily, but compare item by item to see whether the same work is included.

Can a fence hold back the soil on my terrace?

No. A fence is not a retaining wall. A technician must design one if needed.

How do I know where my boundary is?

Use boundary markers, plans and, if needed, a surveyor. Settle disputes before building.

Does drainage matter for a mesh fence?

Yes, especially with a continuous base on a slope. Water needs a way through.

Should I choose 2D or 3D?

It depends on the site and purpose. Our comparison article explains the differences.

Can you check my plans before I buy material?

Yes. Send us the details and we will tell you if anything is missing or incompatible.

Get a quote

Send photos and the length of your fence line

We build the whole fence – groundwork, base, posts and panels. Send photos and the approximate length for a first assessment and an itemised quote, no commitment.